foundry

//! nbtest -- checks O_NONBLOCK: "would block" becomes EAGAIN instead.
//!
//! A blocking read on an empty pipe sleeps until data comes. With
//! O_NONBLOCK (set with fcntl(F_SETFL), ioctl(FIONBIO), pipe2 or
//! SOCK_NONBLOCK) it returns -EAGAIN at once ("try again later"), which
//! is what an event loop wants: it only reads when poll said "ready", and
//! must never get stuck on one fd.
#![no_std]
#![no_main]

#[macro_use]
#[path = "ulib.rs"]
mod ulib;

extern crate alloc;

use ulib::*;

const FIONBIO: u64 = 0x5421;

fn main() -> i64 {
    let mut c = Checks::new("nbtest");
    let mut buf = [0u8; 4096];

    // Pipes.
    let (r, w) = pipe2(O_NONBLOCK).unwrap();
    c.check(read(r, &mut buf) == -EAGAIN, "pipe: read with nothing there: EAGAIN");
    let mut p = [PollFd { fd: r as i32, events: POLLIN, revents: 0 }];
    c.check(poll(&mut p, 0) == 0, "pipe: poll says not readable");
    let mut total = 0;
    loop {
        let n = write(w, &buf);
        if n < 0 {
            c.check(n == -EAGAIN, "pipe: write to a full pipe: EAGAIN");
            break;
        }
        total += n;
    }
    println!("nbtest: the pipe took {} bytes before it was full", total);
    c.check(total == 65536, "pipe: holds 64 KiB, like Linux");
    let mut p = [PollFd { fd: w as i32, events: POLLOUT, revents: 0 }];
    c.check(poll(&mut p, 0) == 0, "pipe: poll says a full pipe isn't writable");
    c.check(read(r, &mut buf) == 4096, "pipe: then reading works");
    c.check(poll(&mut p, 0) == 1 && p[0].revents & POLLOUT != 0, "pipe: room again -> POLLOUT");
    close(w);
    while read(r, &mut buf) > 0 {}
    c.check(read(r, &mut buf) == 0, "pipe: writer gone -> end of file, not EAGAIN");
    close(r);

    // fcntl and FIONBIO switch it on and off.
    let (r, w) = pipe().unwrap();
    c.check(fcntl(r, F_GETFL, 0) as u64 & O_NONBLOCK == 0, "fcntl F_GETFL: blocking by default");
    set_nonblocking(r, true);
    c.check(fcntl(r, F_GETFL, 0) as u64 & O_NONBLOCK != 0, "fcntl F_SETFL O_NONBLOCK sticks");
    c.check(read(r, &mut buf) == -EAGAIN, "fcntl-made nonblocking pipe: EAGAIN");
    let off = 0i32;
    ioctl(r, FIONBIO, &off as *const i32 as u64);
    c.check(fcntl(r, F_GETFL, 0) as u64 & O_NONBLOCK == 0, "ioctl FIONBIO 0 turns it off");
    close(r);
    close(w);

    // Sockets (over loopback).
    let l = socket(SOCK_STREAM, 0);
    bind(l, 7080);
    listen(l, 2);
    set_nonblocking(l, true);
    c.check(accept(l).0 == -EAGAIN, "socket: accept with nobody calling: EAGAIN");
    let s = socket(SOCK_STREAM | O_NONBLOCK, 0);
    let r = connect(s, Ip([127, 0, 0, 1]), 7080);
    c.check(r == 0 || r == -EINPROGRESS, "socket: nonblocking connect: EINPROGRESS (or done at once)");
    let mut p = [PollFd { fd: s as i32, events: POLLOUT, revents: 0 }];
    c.check(poll(&mut p, 2000) == 1 && p[0].revents & POLLOUT != 0, "socket: poll POLLOUT = connected");
    let mut p = [PollFd { fd: l as i32, events: POLLIN, revents: 0 }];
    c.check(poll(&mut p, 2000) == 1, "socket: listener POLLIN = a connection to accept");
    let (a, _) = accept(l);
    c.check(a >= 0, "socket: accept it");
    c.check(read(s, &mut buf) == -EAGAIN, "socket: recv with no data: EAGAIN");
    write(a, b"hi");
    let mut p = [PollFd { fd: s as i32, events: POLLIN, revents: 0 }];
    poll(&mut p, 2000);
    c.check(read(s, &mut buf) == 2, "socket: data after POLLIN");
    close(a);
    close(s);
    close(l);

    // A terminal: the slave side of a pty.
    if let Ok((m, n)) = openpty() {
        let slave = open(&alloc::format!("/dev/pts/{}", n), O_RDWR | O_NOCTTY | O_NONBLOCK);
        c.check(read(slave, &mut buf) == -EAGAIN, "tty: read with no line typed: EAGAIN");
        close(slave);
        close(m);
    } else {
        c.check(false, "openpty");
    }

    // Small extras libc needs: pread/pwrite, writev, clocks, nanosleep.
    let fd = open("/tmp/nbtest.txt", O_CREAT | O_TRUNC | O_RDWR);
    writev(fd, &[b"hello ", b"vectored ", b"world"]);
    pwrite(fd, b"HELLO", 0);
    let n = pread(fd, &mut buf, 6);
    c.check(&buf[..n.max(0) as usize] == b"vectored world", "writev + pread at an offset");
    c.check(lseek(fd, 0, SEEK_CUR) == 20, "pread/pwrite leave the file position alone");
    lseek(fd, 0, SEEK_SET);
    let n = read(fd, &mut buf);
    c.check(&buf[..n.max(0) as usize] == b"HELLO vectored world", "pwrite overwrote the start");
    close(fd);
    unlink("/tmp/nbtest.txt");
    // readv: one read filling several buffers in turn.
    let fd = open("/tmp/nbtest.txt", O_CREAT | O_TRUNC | O_RDWR);
    write(fd, b"abcdefgh");
    lseek(fd, 0, SEEK_SET);
    let (mut a, mut b) = ([0u8; 3], [0u8; 5]);
    let n = readv(fd, &mut [&mut a, &mut b]);
    c.check(n == 8 && &a == b"abc" && &b == b"defgh", "readv fills the buffers in order");
    close(fd);
    unlink("/tmp/nbtest.txt");

    // select and ppoll on a pipe: not readable, then readable.
    let (r, w) = pipe2(0).unwrap();
    let (mut rs, mut ws) = ([0u64; 16], [0u64; 16]);
    fd_set(&mut rs, r);
    let t0 = now_us();
    c.check(select(r + 1, &mut rs, &mut ws, 20_000) == 0 && now_us() - t0 >= 20_000, "select: times out after 20 ms on an empty pipe");
    write(w, b"!");
    let (mut rs, mut ws) = ([0u64; 16], [0u64; 16]);
    fd_set(&mut rs, r);
    fd_set(&mut ws, w);
    c.check(select(w.max(r) + 1, &mut rs, &mut ws, 0) == 2 && fd_isset(&rs, r) && fd_isset(&ws, w), "select: pipe readable + writable");
    let mut p = [PollFd { fd: r as i32, events: POLLIN, revents: 0 }];
    c.check(ppoll_us(&mut p, 0) == 1 && p[0].revents & POLLIN != 0, "ppoll: POLLIN");
    close(r);
    close(w);

    // getcwd and uname, which libc start-up and `uname -a` use.
    let mut cwd = [0u8; 64];
    let n = getcwd(&mut cwd);
    c.check(n > 0 && cwd[0] == b'/', "getcwd gives an absolute path");
    let mut ub = [0u8; 6 * 65];
    let u = uname(&mut ub);
    c.check(u[0] == "Rustbelt" && u[3].starts_with("stage 15"), "uname: Rustbelt, stage 15");

    let (secs, _) = clock_gettime(0);
    c.check(secs > 1_600_000_000, "CLOCK_REALTIME is a real date (after 2020)");
    let t0 = now_us();
    nanosleep_us(30_000);
    c.check(now_us() - t0 >= 25_000, "nanosleep 30 ms");
    let mut link = [0u8; 64];
    let n = readlink("/proc/self/exe", &mut link);
    c.check(n > 0 && link[..n as usize].ends_with(b"nbtest"), "readlink /proc/self/exe = this program");
    c.done()
}